Back to top

Traditional Bamboo

PANELS + VENEER

Solid stock and cross-ply panels for cabinetry, wall treatments, and mor

Teragren’s traditional bamboo panels and veneer are ideal for any interior use where hardwood may traditionally be used, including cabinetry, reception areas, wall treatments, furniture and more. This material machines nicely, finishes cleanly and comes in classic colors with either a horizontal or vertical grain pattern that makes these products a preferred substitute to hardwood plywood for increased durability, a unique and refined look, and low environmental impact. PureForm panels are manufactured with an ultra-low emitting or formaldehyde free adhesive.

PERFORMANCE & DURABILITY

• Optimum 5.5 Moso Bamboo: Harvested at maturity for peak density, creating a harder and more stable product for lasting beauty and performance

• Teragren’s premium PureForm traditional bamboo – 40% harder than oak.

• Furniture Grade

• Oversized sheet goods for more efficient yield available for many products

PRODUCT DOCUMENTS

PRODUCT INFORMATION

INSTALLATION + CARE

PRICING

Teragren panels & veneers are sold through a network of retailers. Locate a retailer near you

COLOR SWATCHES

Teragren Traditional Panels and Veneer VGN Thumbnail
Vertical Grain Natural
1’x8’x13/16″ | Solid Stock | UFFP-VGN1x8
4’x8’x3/4″ | Cross-ply | VGC Core | UFP-3/4-VGN4X8-3*
4’x8’x1/8″ | 5-ply | EPI-VLAM-1/8VGN4x8-4*
4’x8’x1/42″ | Solid Stock* | 60g Paper fleece backing
EPI-TUFVGN6M4X860GM5*
Teragren Traditional Panels and Veneer VGC Thumbnail
Vertical Grain Caramelized

4’x8’x3/4″ | Cross-ply | VGC Core | UFP-3/4-VGC4X8-3*

Teragren Traditional Panels and Veneer FGN Thumbnail
Flat Grain Natural
1’x8’x13/16″ | Solid Stock | UFFP-FGN1x8
4’x8’x3/4″ | Cross-ply | UFP-3/4-FGN4X8-3

SPECIFICATIONS

ACCESSORIES

Edge Banding available in Vertical Grain
7/8″ x 500′ x 1/42″ rolls, with 30g paper fleece backing. Not pre-glued.

ADHESIVE

All adhesives are CARB compliant. See the >> Product Chart for adhesive make-up by product.

HARDNESS

40% Harder Than Oak

GRIT

Sanded to 180 grit all sides. 180 grit for 1/42″ veneer.

WARRANTY:

Five Years from the date of purchase.

Teragren LLC warrants that our Panels and Veneer will not delaminate or separate as a result of a manufacturing defect during the Warranty Period. Teragren further warrants that the Panels and Veneer are free from defects in material and manufacturing when used for their intended interior application.

INDOOR AIR QUALITY

SCS Indoor Advantage Gold certified: 13/16″, 3/4″, 1/2″, 1/4″

ECOSMART

All products certified USDA BioPreferred – 99% biobased product.

LEED v3 credit

MR 6 – Rapidly Renewable Materials: all products qualify
IEQ 4.4 – Low Emitting Materials: all products qualify

FABRICATION + INSTALLATION

ACCLIMATION + SITE CONDITIONS

Ensure product is maintained at 35-55% relative humidity throughout fabrication and installation. Bamboo, like hardwood, may expand or contract when exposed to high or low relative humidity.

ADHESIVES

Most common woodworking adhesives suitable to the cabinet and furniture manufacturing industry have been used successfully and can be recommended such as polyvinyl acetates (PVA) glue and aliphatic resin glue (yellow glue)

LAMINATION

Veneer may be cold molded, vacuum pressed or hot pressed. Veneer and substrate must both have the same moisture content prior to laminating.

RADIUS APPLICATIONS

1/42″ and 2-ply veneer are best used for a radius application when laminated to a kerfed or flexible substrate. 1/8″ Traditional and Strand bamboo panels may also be considered for moderate radius applications

CUTTING AND TOOLING

Standard hardwood woodworking guidelines apply, carbide tipped tools recommended.

FASTENING

Pilot holes, pre-drilling, oversized slots for screw inserts, panel clips or other methods that allow for expansion and contraction are necessary for unrestrained applications and countertops.

>> Download Installation Guidelines